Loading...
HomeMy WebLinkAboutSOG 201.01 REVISED 11-2008 Beaumont Fire-Rescue Services STANDARD OPERATING GUIDELINES STANDARD OPERATING GUIDELINES STANDARD OPERATING GUIDELINES 201.01 – Local ICS & the National Incident Management System Effective: 6/1/1985 System SystemMMMMMmmmMaManagement Anne Huff, Revised: 5/1/1999, 3/1/2004, 11/5/2008 System Replaces: Fire Chief I. Guiding Philosophy Beaumont Fire/Rescue Services responds to many different types of emergency calls for service. To provide for the safety and welfare of our members, and to effectively manage resources at the emergency scene, we are committed to applying the principles of incident management on all types and sizes of emergency responses. II. Purpose The purpose of this policy is to define and describe the essential elements and practical implementation of the incident management system as adopted and applied by Beaumont Fire/Rescue Services. III. Goals The goals of this policy are to: A. Identify components of the incident management system as applied to escalating types of emergency events, B. Establish expectations in the implementation of the system by defining and describing the system’s components, and C. Enact a chain of responsibility and accountability throughout all levels of the organization to insure the system is effectively implemented at all emergency incidents. All BF/RS members shall be trained on and use the Incident Management System detailed within this policy. IV. Definitions  Accountability System - the established procedures for tracking of personnel assigned within the hazard zone at an emergency event.  All Clear - tactical benchmark indicating that primary search is complete.  Allocated Resources - resources dispatched to an incident that have not yet checked-in with the Incident Commander.  Area Command - an expansion of the incident command function primarily designed to manage a very large incident that has multiple incident management SOG 201.01 – Local ICS & NIMS Page 1 of 36 teams assigned. Area Command can be established anytime that incidents are close enough geographically that oversight is required to ensure conflicts do not arise between incident management teams.  Assigned Resources - resources checked-in by the Incident Commander and assigned to work tasks on an incident.  Assumption of Command - the initiation of the Incident Management System at an emergency event, which is confirmed through the broadcast of a standard initial radio report by the Incident Commander.  Base - at large scale incidents, the location where the primary logistics functions are coordinated and administered. There can be multiple camps, but there is only one base established per incident.  Branch - under NIMS, the organizational level having functional or geographic responsibility for major parts of incident operations. If activated, the Branch Level is below the Section Level of the incident organization chart. (i.e. Operations Section  Medical Branch, Law Branch, etc.)  Camp - a geographical site within the general incident area, separate from the base, equipped and staffed to provide food, water, and sanitary services to incident personnel.  Clear Text - use of plain English in radio communications transmissions.  Command - the act of directing, ordering, and/or controlling resources by virtue of explicit legal, agency, or delegated authority.  Command Staff - group of incident management personnel composed of the: Safety Officer, Liaison Officer and the Information Officer, who report directly to the Incident Commander.  Completion Report - report made by the supervisor of a task level assignment to the Incident Commander that the assignment has been completed.  Cooperating Agency - an agency supplying assistance other than direct suppression, rescue, support or service functions (i.e. Red Cross, natural gas utility company, etc.).  Crew - at the task level, a group of no less than two persons organized for a specific purpose who are assigned to a particular supervisor.  Crew Integrity - for crews operating inside the hazard zone, maintenance of the crew within the visual or tactile reach of their supervisor.  Critical Incident Factors - those incident factors that may result in severe negative consequences at the scene if left unaddressed.  Customer Stable - tactical benchmark indicating that we have attended to the short/medium range needs of our affected customer(s).  Defensive Mode - command decision to keep emergency response personnel outside of the hazard zone.  Division - under NIMS, the organizational level having responsibility within a defined geographic area (i.e. Northeast Division).  Emergency Traffic - term used to clear designated radio channels used at an incident to make way for important radio communications of a critical nature.  Emergency Traffic Radio Tones - distinctive tones used on designated channel(s) to indicate subsequent communication of emergency information. SOG 201.01 – Local ICS & NIMS Page 2 of 36  Exception Report - report made by the supervisor of a task level assignment to the Incident Commander that the assigned task can not be completed.  Fast Action Incident Commander - the initial incident commander, who makes a conscious decision at the onset of incident operations, to either lead the operation from inside the hazard zone using a portable radio to continue command or to transfer command to a later arriving company/chief officer.  Fast Action Strategy - command decision made within the Offensive Mode of operation where the initial Incident Commander makes a conscious decision to initiate immediate intervention activities inside the hazard zone rather than establish a stationary command post.  Freelancing - operating outside of the established Incident Action Plan.  First Arriver - the ranking City of Beaumont emergency responder to arrive first at the scene of an emergency.  General Staff - group of incident management personnel composed of the: Incident Commander, Operations Section Chief, Planning Section Chief, Logistics Section Chief, Finance/Administration Section Chief.  Group - under NIMS, the organizational level having responsibility within a defined functional area (i.e. Vent Group).  Hazard Zone - a perimeter established at the emergency scene indicating the point at which persons operating inside the perimeter will be exposed to potentially severe circumstances or threatening environments (i.e. fire/smoke, building collapse, etc.).  Immediately Dangerous to Life & Health - An atmospheric concentration of any toxic, corrosive or asphyxiant substance that poses an immediate threat to life or would cause irreversible or delayed adverse health effects or would interfere with an individual's ability to escape from a dangerous atmosphere.  Incident Action Plan (IAP) - within a defined mode and strategy, the logical choice tactics, (and associated tasks) determined by the Incident Commander as an effective means of mitigating the incident problem. For long duration incidents, a written IAP is completed in advance for the upcoming 24-hour operational period, and includes related attachments.  Incident Command Post (ICP) - location where the primary command functions are executed.  Incident Command System - the combination of facilities, equipment, personnel, procedures, and communications operating within a common organizational structure, with responsibility for the management of assigned resources to effectively accomplish stated objectives pertaining to an incident.  Incident Objectives - statements of guidance and direction necessary for the selection of appropriate strategy(s), and for the tactical direction of resources. Incident objectives are based on realistic expectations of what can be accomplished when all allocated resources have been effectively deployed.  Initial Rapid Intervention Crew (IRIC) - a temporary two person rapid intervention crew assigned at the beginning of incident operations to allow teams to enter an IDLH or potentially IDLH atmosphere.  Initial Reporting Process - decision-making and communications process initiated by the first arriver on scene which includes:  assumption of command, SOG 201.01 – Local ICS & NIMS Page 3 of 36  site description and problem situation,  declaration of strategy,  initial tactical assignments (as applicable),  determination of appropriate level of initial resource allocation.  Investigative Strategy - command decision made within the Offensive Mode of operation where the initial Incident Commander makes a conscious decision to investigate a given situation further, prior to allocating additional resources to the potential problem.  Loss Stopped - tactical benchmark indicating property conservation measures are complete.  Marginal Strategy - command decision made within the Offensive Mode of operation where the initial Incident Commander makes a conscious decision to initiate Rescue operations in an environment where the risk to responders is potentially at an unreasonable level, but where there are savable customer lives still believed to be present.  Mode - the broadest level of command decision which determines whether or not emergency response personnel will be sent into the hazard zone (i.e. Offensive Mode or Defensive Mode).  Offensive Mode - command decision to send emergency response personnel inside the hazard zone.  Order Model - communications management procedure which includes the following elements:  receiver indicates they are ready to receive message,  message is transmitted,  receiver briefly restates message to verify understanding.  Operational Period - period of time scheduled for execution of a given set of operational actions as specified in the incident action plan.  Overhead Personnel - personnel assigned to supervisory positions, including the Incident Commander, Command Staff, General Staff, Directors, Supervisors, and Unit Leaders.  Personal Accountability Report (PAR) - report communicating the status of crews assigned to a specific supervisor working inside the hazard zone.  Planning Meetings - meetings held as scheduled throughout medium- to long- duration incidents to select specific strategies and tactics for incident control operations and for service and support planning.  Personnel Accountability - the ability to account for the whereabouts and welfare of personnel assigned to the incident.  Rapid Intervention Group (RIG) - crew(s) designated to standby in a state of readiness to perform a rescue effort for hazard zone workers.  Rehab - resting and treatment of incident personnel who are suffering from the effects of strenuous work and/or extreme conditions.  Reinforced Response - those resources requested in addition to the initial response.  Resources - all personnel and major items of equipment available, or potentially available, for assignment to an incident on which status is maintained.  Risk Management Plan - the established plan for determining the appropriate level of emergency intervention to be taken on-scene. Plan guidelines include:  We will risk our lives a lot, in a highly calculated and controlled manner, to SOG 201.01 – Local ICS & NIMS Page 4 of 36 protect a savable human life;  We will risk our lives a little, in a highly calculated and controlled manner, to protect savable property;  We will not risk our lives at all to protect lives or property that are already lost.  Section - the organizational level having functional responsibility for primary segments of incident operations such as: Operations, Planning, Logistics, Finance/Administration. The Section level is organizationally between the Branch and Incident Commander levels.  Size-Up - process of evaluating current circumstances to determine the critical factors that must be addressed to mitigate the incident problem.  Staging - status of organizational resources after arrival, but prior to assignment on an emergency incident.  Staging Area - location where incident personnel and equipment are awaiting assignment by the Incident Commander.  Strategic Level - overall approach (and positioning) of incident operations, based on the Incident Commander’s chosen mode of operation. (i.e. Offensive Mode  Investigative Strategy, Fast Action Strategy, Marginal Strategy; Defensive Mode  Defensive Strategy).  Stationary Command Post - the fixed location outside of the hazard zone where the Incident Commander is located.  Stationary Incident Commander - incident commander who stays out of the hazard area in a stationary exterior command position.  Strike Team - specified combinations of the same kind and type of resources, with common communications and a leader (i.e. 3 engines).  Tactical Benchmark - a standard of comparison communicated at the completion of a tactical level assignment (i.e. Primary Search Complete, Under Control, etc.).  Tactical Level - organizational level of decision-making that determines the primary groups of activities that must be addressed to effectively mitigate the incident problem. Tactics are based on the Incident Commander’s chosen mode of operation and strategy, established tactical priorities, and the critical incident factors present on scene (i.e. rescue, fire control, forcible entry, ventilation, etc.).  Tactical Priorities - implemented within the limits of our risk management plan and under an umbrella of primary concern for firefighter safety, the established order of tactical intervention measures adopted by the department, including:  Life Safety of Customers,  Incident Stabilization,  Property Conservation,  Customer Stabilization.  Tactical Worksheet - worksheet used by a stationary Incident Commander to document the critical details of conditions, assignments, and work progress at an incident.  Tactics - deploying and directing resources on an incident to accomplish the objectives of the designated strategy.  Task Force - pre-established group of different types of resources, with common communications and a leader (i.e. 1 engine, 1 aerial, 1 chief’s car).  Task Level - organizational level of decision-making based on the tactical level determination that indicates the method of effectively completing the established tactical benchmark (i.e. Fire Control  2" pre-connect to seat of fire). SOG 201.01 – Local ICS & NIMS Page 5 of 36  Transfer of Command - orderly process of handing over command responsibility and accountability to another on-scene individual.  Under Control - tactical benchmark indicating that the fire or emergency situation is now under control.  Unified Command - a team approach to command responsibilities which entails all responding agencies sharing responsibility for the incident by managing the incident through a common incident action plan. This is accomplished without losing or abdicating individual agency authority, responsibility, or accountability.  Unit - organizational element having functional responsibility for a specific incident’s planning, logistics, or administrative activity. V. General Summary of Individual Responsibilities A. As a person works their way up through the incident management organizational hierarchy, the associated level of responsibility becomes more and more involved and difficult to manage. The following provides a general summary of the escalating level of individual responsibilities from the First Arriver on Scene through the stationary Incident Commander: 1. First Arriver on Scene - initiate the Initial Reporting Process to the best of your ability, based on your training, experience, and available information. 2. Firefighter/EMT/Police Officer/Other Responder - know the capabilities of your equipment and your personal limitations; to the fullest extent possible, have your personal protective equipment donned and be ready for action upon arrival; begin work only at the direction of your assigned supervisor; work within your assigned crew and area; notify your assigned supervisor of potential or immediate safety-related problems; comply with departmental/City communications procedures. 3. Driver/Operator - all of the responsibilities listed above; AND, follow department/City policies and common sense while driving to the incident so that you and your personnel arrive safely; adhere to appropriate staging procedures upon arrival; spot your apparatus to allow for best tactical advantage and access of other responding units. 4. Company Officer/Crew Supervisor - all of the responsibilities listed above; AND, do our best to maintain the integrity of your assigned crew(s) within the hazard zone at all times; insure that your crew(s) abides by all departmental/City safety procedures; provide progress, exception, and completion reports as required; call for additional help if you need it. 5. Fast-Action Incident Commander - all of the responsibilities listed above; AND, determine initial strategy, tactical and task level duties as required; develop and communicate an Incident Action Plan (IAP) to logically address the critical incident factors present; follow departmental procedure when communicating the IAP to responders. 6. Stationary Incident Commander - all of the responsibilities listed above; AND, upon arrival, assume command according to department policy; continually size-up the situation and revise the IAP as needed; manage SOG 201.01 – Local ICS & NIMS Page 6 of 36 incident communications; manage the deployment of on scene personnel and equipment; manage the development of the incident organization; manage the overall accountability and safety of crews within the hazard zone; provide for rest and rehab of operating crews; demobilize forces and terminate command as required. 7. Off-Duty or Other Responders Subsequently Arriving on Scene - position your vehicle so that it will not restrict access/movement by emergency apparatus; check-in with command; follow orders and assume responsibilities as directed by Command and department or City policy. VI. Incident Management System Components A. Incident Types and Local Command Levels - Nationally, there are five types of incidents that require escalating command experience. Listed by the predominate level of governmental resource allocation required for mitigation, they are: 1. NIMS Type 5 – City 2. NIMS Type 4 - City/County (Local Mutual Aid) 3. NIMS Type 3 - Regional/State 4. NIMS Type 2 - State/National 5. NIMS Type 1 – National B. Most emergency events are handled by Incident Commanders at the local level, and are classified as NIMS Type 5. For local responders, the “NIMS Type 5" events encountered can vary greatly in terms of complexity of the problem, resources required to mitigate it, and the level of command needed to manage it. Keeping this in mind, the NIMS Type 5 incidents we normally see can be broken down further to define the complexity, resource and command needs of a local 1 emergency incident \[NIMS Type 5 (Local) Sub-Classifications\]: 1. Command Level 5A - Company Officer IC/Initial Arriving Unit/Member 2. Command Level 5B - District Chief IC 3. Command Level 5C - Command Team (Unified Command) 4. Command Level 5D - Command Team with Sections implemented 5. Command Level 5E - City Emergency Operations Center (EOC) activated C. When the County activates its EOC, then the emergency has escalated to a NIMS Type 4 event. If escalation continues, where regional, state, and national plans/resources are activated, the incident type changes accordingly. D. Functions of Command - For any type of incident or at any command level, effective incident management involves applying each of the following eight command functions: 1. Assumption, Confirmation, and Positioning of Command - establish Command at the very beginning of operations to insure that we start under control, stay under control, and never lose control. 1 These sub-classifications are derived from Brunacini’s Fire Command. SOG 201.01 – Local ICS & NIMS Page 7 of 36 2. Situation Evaluation - create safe operations based on accurate initial and ongoing incident evaluation and information management. 3. Incident Communications - keep everyone lined together so that we stay connected to get in/do our jobs/move quickly/get out quickly (if necessary). 4. Deployment Management - provide, manage, and protect workers with the timely dispatch and adequate on-scene placement of adequate, appropriate resources. 5. Identification of Strategy/Development of Incident Action Plan (IAP) - safely position and move (where necessary) workers based on actual (and forecasted) conditions, within our standard Risk Management Plan. 6. Development of Incident Organization - establish decentralized division/group bosses to functionally and/or geographically manage incident operations and worker welfare more directly. 7. Review, Evaluation, and Revision of the IAP - continually evaluate and revise (as required) operations to effectively connect the current incident action plan to changing conditions. 8. Continuing, Transferring, and Terminating Command - continue to support an IC/Unified Command throughout operations and support safety, by strengthening command continuation through effective transfer, upgrade, and demobilization. E. As an incident becomes more complex, so does its command needs. The discussion below will describe the functions of command for events encountered most often locally, Type 5- Sub-Classifications 5A through 5C events VII. Assumption, Confirmation, and Positioning of Command A. The initial Incident Commander will confirm a command presence on scene by broadcasting a standard size-up report. This report should include, at a minimum: 1. Unit designation 2. Arrival 3. Assumption of command 4. Name and location of the command post 5. Conditions. Example: “Engine 4 on scene as Manor Command on alpha side. Two story residence, metal roof, fire showing from two rooms on second floor, delta side.” B. Initial command positioning will be dependent on incident conditions and resource requirements. However, a stationary command post should be situated as soon as possible in a location that is outside of the hazard zone. It should afford the IC a good overall view of the scene and surrounding area. Ideally, the command post would offer a view of the two most critical sides of the situation. Since effective radio communications is essential to command, the stationary Incident Commander should position him/herself to maximize his/her ability to hear and respond to radio communications. SOG 201.01 – Local ICS & NIMS Page 8 of 36 VIII. Situation Evaluation A. The size-up and subsequent Initial Reporting Process involves three separate, but equally important skills sets: 1. Evaluating the current situation (What’s the problem?) 2. Deciding on appropriate intervention (What can we realistically do to solve it?) 3. Communicating the intervention plan to responders (Who’s doing what?) B. The Initial Reporting Process begins with an assessment that takes into consideration the following four elements: 1. The knowledge, level of training, and experience of the individual. 2. Known reported or reconnaissance information. 3. Observed visual information. 4. Known pre-planning information. 5. Who’s doing what? C. An accurate evaluation of these elements should result in an effective determination of the Critical Incident Factors that need to be addressed. Based on this evaluation and our established Risk Management Plan, decisions determining the Mode, Strategy, Tactics, and Tasks are made. The logical order of decisions is illustrated in the decision flow chart in Figure 1. Completion of the evaluation and decision-making portions of the process outlined in Figure 1 results in the development of the Incident Action Plan (IAP) by the initial Incident Commander. D. Persons assuming command subsequently are charged with continually assessing all forms of incoming incident information in order to update or revise the IAP as required. SOG 201.01 – Local ICS & NIMS Page 9 of 36 STRATEGY MODE TACTICS  Rescue Fire Control Water Supply  Exposure Protection  IRIC Extrication  Forcible Entry Patient Care Product Identification  Ventilation Loss Control Scene Security Containment TASKS  pull pre-connect to seat of fire apply AED establish perimeter  apply Positive Pressure Ventilation  administer O  lay 5" supply line 2  monitor CO levels triage patients lay un-manned monitor  identify product  ladder building control traffic  evacuate area  throw salvage covers set up decon set up aerial apparatus Figure 1: Command Decision Matrix SOG 201.01 – Local ICS & NIMS Page 10 of 36 IX. Incident Communications A. Along with the standard size-up report, the initial IAP is communicated to in- coming responders over the radio. This initial report and IAP should provide responders with a solid visual picture of the current incident problem and intervention plan, in as concise terms as possible. This standard Initial Reporting Process should communicate the following elements: 1. Unit on scene with assumption and location of Command, 2. Site description and problem situation, 3. Declaration of strategy, 4. Initial tactical assignments (as units report arrival at the Level I staging location), 5. Determination of appropriate level of additional resource allocation (if applicable). Example: “Engine 4 on scene as Manor Command on alpha side. Two story residence, metal roof, fire showing from two rooms on second floor, delta side. Reported person trapped. We’re fast action for rescue, employing fire control. Passing Command to next unit.” Example: “Engine 4 on scene as Manor Command on alpha side. Two story residence, metal roof, second floor fully involved. We’re defensive to protect exposure on the delta side. (As units report their arrival at Level I staging location)-- E9-water supply, E7- protect exposure on bravo side, S7-report to Command for assignment.” B. The Order Model will be utilized to the extent possible at all incidents to insure that communication of assignments and important incident information is effectively received and understood. Personnel should keep in mind that efficient emergency scene communications maintain a balance of descriptiveness and conciseness. The goal for the sender is to create a solid visual picture for the receiver while using as few words as possible. C. To further the goal of conciseness in communications on scene, the geographic sides around a building will be identified by assigning the address side of the occupancy as “Side A” or “Division A.” Other alphabetical designations are provided clockwise around the building, as illustrated in Figure 2. D. The following terms will be used in communications to clarify the alphabetical designations: 1. “A” - Alpha 2. “B” - Bravo 3. “C” - Charlie 4. “D” - Delta SOG 201.01 – Local ICS & NIMS Page 11 of 36 Figure 3Division Designation in Multi-Story Occupancies: Figure 2: Side or Division Designation E. In multi-story occupancies, geographic divisions will be designated by floor number (i.e Division 6 is the sixth floor) as shown in Figure 3. In some cases, the floor designation may be subdivided into more precisely defined geographic areas, such as “Division 6-Alpha” or “Division 4-Delta.” F. Units are considered arrived when they reach their Level I staging location. Incoming units will follow established staging procedures (see SOG 205.06, Staging: Levels I and II) and will notify Command over the tactical radio channel that they are staged. SOG 201.01 – Local ICS & NIMS Page 12 of 36 X. Deployment Management A. The primary goal of deployment management is to provide and manage a steady, adequate, and timely stream of appropriate resources. The objective is to place resources in the right place, at the right time, performing correct, standard action. Maintaining an awareness of the status of resources assigned, deployed and working at the incident site is the responsibility of the on-scene Incident Commander/Unified Command. B. Standard response assignments provide the capability of making important resource planning and allocation decisions prior to emergency events. Pre- arranged response assignments save time in both the initial dispatch and throughout an escalating event. Standardizing the deployment approach creates an effective understanding among participants based on basic resource-management procedures. For these reasons, both dispatchers and Incident Commanders will follow SOG 205.01 - Deployment Management when allocating human and equipment resources to incidents. C. After the IC has arrived on-scene and evaluated conditions, he/she will refine the initial deployment decisions that dispatch has made. From a deployment perspective, this may involve holding the initial assignment, requesting additional resources, cancelling resources, or any other modification that is necessary. Initially, the major on-scene IC deployment functions are directed at getting the right type and amount of resources safely in the right place, at the right time, doing the right thing. This involves the following deployment activities: 1. Quickly developing an event/response profile 2. Determining how much and what kind of resources are needed 3. Calling for additional resources as required, returning unneeded resources 4. Assigning resources to complete the Incident Action Plan (IAP) 5. Maintaining a current and accurate inventory and tracking of resources 6. Operating an overall incident accountability system including personnel accountability and staging procedures D. Simply, the best chance for local responders to “win” a battle with Mother Nature occurs as close as possible to the beginning of the event. The longer an active, escalating incident goes on, the more challenging it becomes for the IC to overpower expanding problems. An adequate amount of force in the beginning can eliminate the need for a lot more force later on. This reality creates the need to “front-end load” our response and command systems to maximize the probability for early mitigation. The longer the overall command system practices developing and connecting the two basic “front-end load” system elements (type/amount of work to number of workers needed) as early as possible in the incident– the quicker, more accurate, and smoother resource deployment needs will be met. SOG 201.01 – Local ICS & NIMS Page 13 of 36 E. Experienced and effective IC’s develop their ability to practically apply a routine that identifies the dynamic factors related to evaluating conditions, and then automatically translates those conditions into actions: Conditions  Achievable Goals  Tactical Needs/Objectives  Operational Tasks  Orders  Action  Evaluate Outcome  Make Adjustments F. While the IC must evaluate the conditions that caused the initial problem, he/she must avoid the inclination to be preoccupied with what happened before he/she arrived, and rather focus on the difference that can be made now that he/she is on- scene. The Incident Commander should call for and manage the resources he/she feels are needed to mitigate the event, under the guidance provided by our Risk Management Plan. When additional resources are required, the IC must not be timid about ordering what he/she believes to be necessary according to the event evaluation/forecast. G. While the IC must evaluate the conditions that caused the initial problem, he/she must avoid the inclination to be preoccupied with what happened before he/she arrived, and rather focus on the difference that can be made now that he/she is on- scene. The Incident Commander should call for and manage the resources he/she feels are needed to mitigate the event, under the guidance provided by our Risk Management Plan. When additional resources are required, the IC must not be timid about ordering what he/she believes to be necessary according to the event evaluation/forecast. H. The Incident Commander is responsible for maintaining incident control. The essence of incident control is the ability of the Incident Commander to create, manage, and if necessary– quickly move the position and function of the resources he/she is responsible for. This requires everyone operating on scene to be “enrolled” as a participant in the Incident Commander’s deployment/accountability roll call. For this reason, proper implementation of staging, check-in, and accountability procedures, and maintenance of crew integrity is essential for all responders. Additionally, stationary IC’s should utilize the Tactical Worksheet or other means to facilitate effective deployment and accounting of incident resources. I. Division/Group Supervisors receiving and acting on orders, and providing progress, completion, and exception reports to Command are the IC’s basis for evaluating outcomes and making adjustments to the IAP. Unaccounted for freelancers operating outside the established IAP cause the IC to lose control over deployed resources, jeopardizing the safety of all responders. Freelancing is therefore unacceptable and will not be tolerated. J. Both dispatch and the Incident Commander must determine the type of incident problems that are present and what resources/agencies will be required to solve these problems. Many times incidents require some combination and involvement SOG 201.01 – Local ICS & NIMS Page 14 of 36 of fire, EMS, law enforcement, public works, local industry, or other mutual aid agencies. Cooperating agencies like the Red Cross, Salvation Army or utility companies also routinely support incident mitigation. XI. Identification of Strategy/Development of Incident Action Plan (IAP) A. Experience and luck are good things, but they are not enough, in and of themselves, to consistently run an effective incident management decision- making and operational process. Critical capabilities for the IC are to know and be prepared for the things that are similar in similar types of incidents, to determine and communicate how those “similarities” will routinely be handled, and to have the ability to figure out and react to the special/different conditions that present themselves. These capabilities combine to determine the strategy and IAP– the operational game plan that responders will implement. B. Referring back to Figure 1 (page 11), there are two “modes” of overall operational strategy– offensive and defensive. Offensive operations are conducted inside the hazard area. Defensive operations stay outside the hazard area. The modes are position-based and are mutually exclusive– the Incident Commander must choose one or the other, and responders must respect that choice. Under the chosen operational mode, connecting the strategic, tactical and task levels so that they all operate within the same basic strategy is a major IMS goal. C. Deciding on and then managing the overall mode and strategy involves more practical, achievable opportunity to determine overall operational and safety success (or failure) than does any other function. The choice and effective management of mode/strategy becomes the “moment of truth” for the whole incident management system. Effective management of the overall mode/strategy by the IC provides the following benefits: 1. Structures decision making and evaluation 2. Standardizes understanding and communications 3. Provides operational control 4. Improves overall effectiveness 5. Supports incident safety D. Simply, offensive and defensive operations are different. Strategy confusion is always a mistake. This being the case, there are a number of Critical Incident Factors that the IC must consider when determining the operational mode and strategy. These include: 1. Fire/hazard extent and location - How much and what part of the building/area is involved? 2. Savable occupants - Is there anyone alive to save? 3. Fire/hazard effects - What are the structural/environmental conditions? 4. Savable property - Is there any property left to realistically save? 5. Entry and tenability - Can forces get in the building/area and stay in? 6. Ventilation profile - Which ventilation technique is appropriate? (In general, Can’t go on roof = Can’t go inside.) SOG 201.01 – Local ICS & NIMS Page 15 of 36 7. Special hazards - Hazmat? Confined Space? High Angle?, etc. 8. Local violence - Do we need PD to stabilize before we can operate? 9. Terrorism - Chemical? Biological? Nuclear? Explosives? 10. Resources - Are sufficient resources available for the attack? E. A defensive mode of operation logically implies a defensive (exterior) strategy decision. The defensive mode is a heavy-duty, cut-off oriented approach. The IC concedes property or lives already lost to the problem, and decides where the cut off will take place. This is why, during active defensive operations, perimeter control becomes critical. Every responder must be aware of the basic strategic and tactical game plan, must be offensive/defensive literate, and must be cooperative in implementing that plan to avoid unnecessary risk to personnel. Defensive operations (and outcomes) should not be regarded as failures– they are simply a standard outcome that corresponds to a standard stage in the life cycle of an event. F. Whenever and wherever our basic safety system will adequately protect personnel from the hazardous conditions that are present, the IC should order a strong, well- supported offensive attack that controls hazard conditions and directly protects threatened customers. The offensive attack mode is aggressive and quickly moves in to directly overpower the problem from within the hazard zone. Aggressive means forceful, active, and deliberate... it also means conscious, thoughtful, and standard. In an offensive mode, the Incident Commander may make one of the following strategy choices: 1) Investigate, 2) Fast Action, or 3) Marginal. G. “Nothing showing,” barring information gained from other sources, logically implies an investigative strategy. A fast attack strategy is warranted when the initial Incident Commander makes a conscious offensive mode decision, believing that, within the parameters of our Risk Management Plan, initiation of immediate intervention activities inside the hazard zone would positively impact the incident problem. Marginal situations occur when the Incident Commander consciously decides that responders are cleared to assume an otherwise unreasonable amount of risk, in a highly calculated manner, to protect a savable life. A marginal strategy decision is always tied to the probability of achieving a rescue. Quickly completing a search and rescue is the only reason that responders should be operating within a marginal strategy. H. It is important to remember that mode and strategy decisions can change throughout the life cycle of an event. The evaluation of current conditions indicates if the situation is improving or deteriorating, placing the current event profile on a relative scale. It is the Incident Commander’s on-going responsibility to have the patience and discipline required to accurately assess the current incident profile and to make adjustments to the operational game plan as required. It is the responder’s responsibility to follow the plan as established by the IC. SOG 201.01 – Local ICS & NIMS Page 16 of 36 Current Profile |___________________|________________|__________________| Investigate Fast Action Marginal Defensive Conditions  I. Elapsed incident time notifications provide the IC a time-based measuring standard to judge the effects that established operations are having on the incident problem. They provide a reference point, helping the IC to gauge the current event profile’s status. At all one alarm and greater fires, elapsed incident time notifications will be provided to Command by the dispatcher over the tactical radio channel every 10 minutes, beginning from the communication of the initial report and IAP. For other incident types, the IC may request that dispatch provide elapsed incident time notifications at a different interval(s) according to the incident circumstances. Command will then acknowledge the notification and re-declare the incident strategy over the tactical radio channel. For example, “Headquarters to Manor Command, you’re at 10 minutes elapsed time.” “Manor Command received, 10-minute elapsed time, we’re still in offensive mode.” J. To maintain strategic command and control over the incident, the Incident Commander must continually ask and answer the following questions: 1. Have I effectively evaluated incident conditions? 2. Have I balanced those conditions against our Risk Management Plan? 3. Have I made a conscious offensive/defensive decision? 4. Have the troops gotten in position based on IC orders/SOGs or have the freelanced into those positions? 5. Am I in a position to observe and hear progress/exception/completion/condition reports so that I can effectively evaluate changing conditions? 6. Have I forecasted what will happen in the future (5/10/15+ minutes ahead)? 7. Do I know if the troops are OK? 8. Can I move the troops, if conditions change? K. This concern for command and control does not mean that the IC must micro- manage every routine event. What it does mean is that the IC establishes a command post (or series of upgraded command posts) upon arrival by effectively evaluating conditions, assigning crews working positions, and then communicating with them while they work to complete the tactical/task assignments ordered. This can be a very subtle facade, but behind it is an IC that is tracking work progress, evaluating conditions, maintaining the inventory and accountability system, all the while being poised to prevent/react to changes that could hurt the workers. SOG 201.01 – Local ICS & NIMS Page 17 of 36 L. The strategic decision describes the overall approach (and position) of the operation and drives the Incident Action Plan (IAP). The IAP provides the tactical assignments required to achieve the offensive/defensive goal. The IAP must follow and match the strategy and is based on the Tactical Priorities:  Life Safety of Customers,  Incident Stabilization,  Property Conservation,  Customer Stabilization– all of these falling under the umbrella of assuming a managed risk to responders (safety focus). Tactical priorities represent intervention plans, prioritized in an appropriate order, to solve the basic problems that are typically present at most incidents. The objectives of each tactical priority are reflected in the following completion benchmarks: 1. “All Clear” - primary search complete. 2. “Under Control” - fire/hazard is controlled (forward progress is stopped, no additional units will be required and there is no imminent danger to responders). 3. “Loss Stopped” - property conservation is complete. 4. “Customer Stable” - we have attended to the short range needs of our affected customers. M. The list of tactical priorities provides the IC a set of functions (what to do), priorities (when/in what order to do them), and benchmarks (how to tell when each function is completed). Tactical priorities must be approached in order. The IC should not proceed to the next priority until sufficient resources have been assigned to reach the current priority. Since emergencies are dynamic events, this is not necessarily a straightforward process. Sometimes activities have to be combined to achieve the objective of the current priority. A common example is when fire control and search operations must occur simultaneously to affect a rescue. N. Effective Incident Commanders soon discover that fires, medical emergencies, and special operations events are more similar than dissimilar. It is essential that the IC develop a standard approach, and then customize the IAP to fit each situation. By doing this, the IC develops and on-going planning approach and style that can be refined and built upon. When the operational mode/strategy decision has been made, the IC then must identify the major tactical needs that must be completed. These needs become the basis for assigning specific tasks to crews, such as: 1. Offensive Mode: a. interior hand-line attack b. complete primary search c. check attic/ventilation d. initiate salvage 2. Defensive Mode: a. EXTERIOR fire attack b. protect exposures c. collapse zone control SOG 201.01 – Local ICS & NIMS Page 18 of 36 O. The IC must quickly translate tactical needs into orders that can be assigned to groups/ crews. The Incident Commander must have the ability to look at an incident and instinctively process the conditions they see into a set of integrated, IAP-oriented orders that are given and then carried out by a team of responders. This is the difference between a strategic- level command officer and a task-level, action-oriented officer. Strong command assumption, accurate situation evaluation, effective control of the communications process, and fast, practical deployment all position the IC to produce a simple, straightforward, executable game plan (IAP). XII. Development of Incident Organization A. The majority of incident management problems can be traced back to some type of strategic or organizational issue. This is one reason that small-scale incidents tend to run smoother than their large-scale counterparts. Small events require fewer resources, are easier to follow, and tend to be over quickly. However, things change significantly when operations escalate beyond the control capability of the initial assignment, and additional resources are called for. This is why the IC must quickly establish an organizational system to decentralize the incident scene into smaller, more manageable, effective, and safer work units. B. Effective incident scene organizations do not happen by accident. They are the product of all the participants coming to an agreement, before incidents occur, on how they will arrange themselves and operate together on scene, and how they will play their assigned roles. Chief Officers are responsible for facilitating this exchange and ensuring commitment to it– and for supporting the agreement by leading personnel in effective pre-planning, table-top/real-time exercises, post-incident reviews, mentoring activities, etc., and by maintaining an overall state of discipline within the ranks. All other personnel are responsible for honoring the operational agreement by following established policies, guidelines, and valid orders. C. No one is more able to influence the tactical responses that create overall incident outcomes (positive or negative) than the Incident Commander. The key to building a successful, used-on-every event, local incident scene organization is to match and balance the size of the organizational structure with the number of resources/crews operating on the scene. The challenge is to “build” the organization as it is needed to match the profile of the incident problem. D. Being well-organized, well-placed, and well-commanded is the most efficient and safest way to bring problems under control. This is the Incident Commander’s role and responsibility. E. However, no command system will effectively compensate for a lack of basic competence. Safe and effective task-level performance is the foundation for building the incident organization. Effective incident operations absolutely SOG 201.01 – Local ICS & NIMS Page 19 of 36 require skillful participants on every level who have the personal and professional capability to play their IMS and operational roles. Responders who are competent and operate within established benchmarks and guidelines will not need much direction performing task-level (i.e. pulling hose lines, raising ladders, driving/operating apparatus and equipment, etc.) assignments. Supervisors are responsible for ensuring that all members are competent and capable of meeting minimum performance standards. F. We must remember that we lead primarily by example. Therefore, the attitude, attributes, and approach we communicate by our day-to-day actions related to IMS has a lot to do with how members view command in general. An effective IC’s day-to-day routine should include: 1. Use the local IMS on every call 2. Stay trained/current/competent in your job responsibilities 3. Lead by example– Show that you care about workers and customer 4. Exercise self control 5. Be flexible 6. Deal promptly with setbacks 7. Commit to always do better the next time... and expect others to do so, as well. G. The IMS defines roles and responsibilities for all participants. It also provides a logical place to review and evaluate how well the people and procedures performed, providing an opportunity to continually improve the services we provide. The IMS will be utilized on every emergency response. Always using the system builds familiarity and provides a structured, standard response each time. This is a key factor in starting incident operations under control, and then maintaining control. H. The three level (strategic/tactical/task) incident organization is built around the type, size, and severity/complexity of the incident. The system is all-risk, meaning it can be used for any type of emergency event. The basic system used to manage each type of incident is the same, the only thing that changes are which functional groups or geographic divisions are used. For example, a residential structure fire may have an IC that manages rescue, fire control, water supply and safety/RIC groups. An IC commanding a major motor vehicle accident may manage extrication, treatment, and transportation groups. I. The incident organization must be able to match the speed, size, and complexity of the problem, and must have the following characteristics: 1. Be put into action by the first arriver at every incident. 2. Have three standard levels: Strategic, Tactical, Task. 3. Use Divisions and/or Groups to manage both the incident geography and/or the functions that are needed. 4. Be able to expand quickly to match the profile of the incident. SOG 201.01 – Local ICS & NIMS Page 20 of 36 5. Control the position and function of all incident scene resources and workers. J. Organizing the operational response with initial assignments begins in the initial IC’s mind well before the call is ever dispatched. Since it is critical that operations not be unnecessarily delayed, especially in fire/rescue situations, the IC must be prepared to accurately assess the situation, develop an initial IAP, and assign incoming units in many cases within seconds of their arrival at the Level I staging location. To do this effectively, the initial IC must be practiced and polished at critically listening to the initial incident information and subsequent updates relayed from dispatch while enroute to the scene, while playing potential event scenarios and their subsequent orders out in his/her mind. By drilling him/herself mentally in this manner on a routine basis as well as while enroute to a call, he/she is more prepared to accurately respond to the event “snapshot(s)” that are encountered upon arrival, and then put crews to work in an organized fashion, without delay. K. Additionally, to maintain consistency, and in an effort to institutionalize the implementation of IMS within the department, the initial Incident Commander is responsible for completing the Initial Reporting Process over the tactical radio channel on ALL emergency calls for service, regardless of their size or complexity. L. To illustrate the initial incident scene organizational requirements for escalating incidents, refer to the following examples: 1. One- or Two- Unit Response a. The majority of local incidents are one- or two-unit calls for service. Examples of these include medical calls, investigations, car/trash/dumpster/grass fires, etc. The organizational routine we establish at these “smaller” incidents sets the stage for our operations at larger, more complex incidents. These types of incidents are short term and don’t require much, if any, additional on-scene organizational support. In any case, if the initial resources and attack solves the problem, expanding the organization stops... IMS serves the responders, not the other way around. Examples of initial reports for events of this type could include: Medical Call - Heart Attack: Upon arrival.... “Rescue 50 on scene as McFaddin Command on alpha side....” (then, when you get to the patient)... “we have patient contact. Fifty-year old male, full arrest. We’re starting CPR and the AED. Have 501 respond.” Radio transmit time: 12 seconds SOG 201.01 – Local ICS & NIMS Page 21 of 36 Investigation - Odor Investigation: “Engine 12 on scene as Royal Command on alpha side. Nothing visible, no odor apparent at this time... we’re investigating.” Radio transmit time: 7 seconds Dumpster Fire: “E6 on scene as Major Command on delta side. We have a dumpster fully involved behind the convenience store, no exposure problem. We’re attacking the fire with the deck gun.” Radio transmit time: 11 seconds Grass Fire: “E3 on scene as Cardinal Command on the northbound service road just south of Avenue A. We have a clump of pampas grass on fire. We’re attacking with a pre-connect.” Radio transmit time: 8 seconds Dispatched as an Investigation, really is a House Fire, Scenario 1: “E14 on scene as Dusty Command on alpha side. One story residence, fire coming from a roof vent on the delta side. Turn in an alarm. We’re fast action to begin primary search, passing command to the next in unit.” Radio transmit time: 15 seconds Dispatched as an Investigation, really is a House Fire, Scenario 2: “E14 on scene as Dusty Command on alpha side. One story dilapidated house, fire coming from a roof vent on the delta side. No evidence of occupancy. Turn in an alarm. We’re defensive.” Radio transmit time: 14 seconds b. The last two examples above illustrate that, at times, situations turn out to be more complex than we might originally assume at dispatch. An important point to be addressed here is the concept of “passing” command. A fast attacking Company Officer may choose to “pass” command to the next arriving Officer– and this may be the optimal choice, particularly when a rescue situation is present. However, an initial IC should not routinely pass command. Officers are responsible and will be held accountable for completion of their standard command responsibilities. 2. Small-Scale, Multiple Unit Responses a. Incidents that fall into this category can include single family residence fires, small commercial fires, multiple patient medical SOG 201.01 – Local ICS & NIMS Page 22 of 36 calls, etc. As in any case, the initial IC begins the incident scene organization by assigning the first alarm response, or by defaulting to a pre-determined set of assignments outlined in established Standard Operating Guidelines for the type of incident being addressed. If the incoming units are not assigned by the initial IC or by SOGs, they are required to automatically follow Level I Staging procedures (refer to SOG 205.02 - Staging: Levels I & II). This gives the IC opportunity to make an assessment, formulate an initial IAP, and give orders without having to worry about incoming units freelancing over the plan. However, as stated previously, the initial IC must not delay the assessment and assignment of incoming units and therefore must be proficient in his/her “read” of the current situation and corresponding implementation of operational and command skills. b. When the initial IC assigns units/crews, he/she is ordering work to be done within groups or divisions– and is simultaneously decentralizing the incident operation. When the order is given, the IC automatically delegates the responsibility to manage the details that go with that particular assignment. The Officer-in-Charge of each group/division is empowered to manage the work activities (within the IC’s plan) for their assigned area or function. This is a major benefit to the IC– he/she has given tactical control over to a person who is in a better position to manage those details. It is also why the “basics”– tactical and task level competence throughout the ranks– is so vitally important. Incident Commanders must be secure in the capabilities of their personnel so that when an assignment is ordered, he/she is confident that it will be effectively completed. Examples of initial reports and assignments for events of this type are: House Fire: “E10 on scene as Corley Command on the alpha side. Two story residence, fire coming from two rooms on the second floor, bravo side. We’re fast action for primary search. Pass Command to next unit on scene.” Radio transmit time: 16 seconds Vehicle Extrication: “E5 on scene as I-10 Command westbound at Major Drive. One car and a dump truck, major damage.... Looks like 3 patients, we’re initiating extrication on a Ford Escort. E10 come in to assist. Med 2-triage. Send another engine, med unit and 501.” Radio transmit time: 18 seconds SOG 201.01 – Local ICS & NIMS Page 23 of 36 HazMat-Overturned Highway Tanker: “E8 on scene as Eastex Command northbound, just south of Lawrence Drive. Overturned tanker leaking from the belly valve, placard number 1993. We’re pulling a pre-connect and are marginal to check the status of the driver. Pass command to next unit on scene.” Radio transmit time: 16 seconds 3. Medium to Large-Scale Incidents a. The IC serves as the resource allocator for the incident and, once groups/divisions are established, assigns additional companies based on resource requests from assigned supervisors. By requiring the IC to assign resources by function or location, it provides the opportunity for him/her to enter the resource into the inventory/accountability tracking system. The monitoring of resources in this way then provides for a safer working environment for all participants. b. Command must develop and build an incident organization that matches the deployment of resources to the incident scene. A significant problem occurs when the IC requests and assigns additional companies at a rate that exceeds the development of the incident organization/ command capability. When this happens, the IC becomes overloaded with the details of managing a large number of companies scattered over the incident site. Command is then overwhelmed, but may still be in need of more resources to do the job. The IC manages this by breaking the incident scene down into groups/divisions AND by assigning command help for him/herself as their span of control grows. 4. Division/Group Assignment and Expansion a. After the initial assignments, the use of divisions/groups is expanded based on the following factors: 1. Early fire/hazard phase overload - when the number of assigned crews threatens the IC’s ability to command. 2. Major operation predicted - when the IC forecasts that the situation will become a major operation. 3. Isolated or remote tactical positions - when crews are operating in positions where the IC cannot see. 4. Dangerous conditions - unsafe structural conditions, hazardous materials, only one-way in or out. 5. Where special functions are needed - hazmat, safety, rehab, etc. SOG 201.01 – Local ICS & NIMS Page 24 of 36 b. Divisions/Groups will be regulated by the following guidelines: 1. Command is responsible for assigning divisions/groups as required for effective operations. 2. Command will advise Division/Group Supervisors of specific tactical objectives to complete. (Depending on the nature of the problem and with time permitting, the strategy and plan should be provided so the Supervisor has some idea of how their assignment fits in the big picture.) 3. The number of companies assigned to a division/group will depend on conditions within that area. Generally, five (5) companies represent the maximum span of control to be assigned to a Supervisor. 4. Divisions will be identified by the naming conventions outlined in Figures 2 and 3 on Pages 12 and 13 of this policy. 5. Groups will be identified by function assigned (i.e Ventilation, Safety, Water Supply, etc.). 6. Supervisors will use their group/division designation in radio communications to Command (i.e. “Vent Group to Command.”). 7. Divisions/Groups will be directed by a Supervisor. Supervisors can be any fire department member designated the assignment by Command, though in most cases will be a Company or Chief Officer (or acting Officer). c. Supervisors are responsible for the following basic functions: 1. Directly supervise the assigned work. 2. Monitor personnel safety, accountability, and welfare. 3. Develop a division/group IAP that integrates with the overall IAP. 4. Redirect division/group activities as required. 5. Request additional resources from the IC as required. 6. Integrate and coordinate with other divisions/groups as required. 7. Regularly advise the IC of situation status, changing conditions, progress, completion, and exception reports. 8. De-commit companies as operations are completed. 5. Assigning Command Help for the Incident Commander a. Each IC has his/her own individual strengths and weaknesses. The command help necessary will depend on the type and complexity of the incident and on the command experience and capabilities of the Incident Commander. Working under the same scenario, one SOG 201.01 – Local ICS & NIMS Page 25 of 36 IC may have the ability to command and adequately track a one- alarm incident with no help, while another may need assistance. The key to effectiveness, however, is that each Incident Commander knows his/her limitations, and order assistance when necessary. b. As the incident grows into and past the capabilities of the first alarm assignment, the Incident Commander should consider utilizing the next arriving Chief Officer as the Support Officer. However, the IC should use discretion and, in any case, should make every effort to utilize resources to their best advantage. If safety is an immediate concern in a particular area, the IC may elect to deploy the Chief Officer in that capacity. If assigned, the roles and responsibilities of the Support Officer are: 1. Define, evaluate, and recommend changes to the plan. 2. Provide direction relating to tactical priorities, specific critical factors, and safety. 3. Evaluate the need for additional resources. 4. Assign logistics responsibilities. 5. Assist with the Tactical Worksheet for scene and resource control and accountability. 6. Evaluate the incident organization and span of control. 7. Other duties as necessary. c. An additional command team position, the Senior Advisor, may also be assigned during greater alarm operations. The Senior Advisor will normally be the highest ranking Officer in the command post. The persons serving as Incident Commander and Support Officer focus on completion of the Tactical Priorities by directing the strategic and tactical components of the incident. The Senior Advisor’s focus is looking at the entire incident and its impact from a broader perspective to provide additional direction, guidance, and advice to the command team. The roles and responsibilities of the Senior Advisor are: 1. Review and evaluate the plan, and initiate any needed changes. 2. Provide an on-going “big picture” view of the overall incident. 3. Review the organizational structure, initiate changes or expansion to meet incident needs. 4. Initiate Section and Branch functions as required. 5. Provide a liaison with other City departments, public officials, outside agencies, property owners, and tenants. 6. Other duties as necessary. SOG 201.01 – Local ICS & NIMS Page 26 of 36 d. If assigned, the Support Officer and Senior Advisor must be located at the command post with the Incident Commander. When these positions are activated, they work with the IC as a team to enhance the command process and make command function more effectively. To avoid confusing working crews, only one of the three command team members will use the radio designation “Command,” and this person should be the only member of the command team talking over the tactical radio channel. e. Keeping all of the previous discussion in mind, effectively organizing medium- to large-scale incidents begins with effective completion of the Initial Reporting Process. It is then maintained when the IC “stays ahead of the curve” strategically through decentralization of tactical objectives and calling for command help when needed. To illustrate, let’s look at a strip mall fire as an example: 1. First unit on the scene (Engine 1) assumes command and completes the Initial Reporting Process as follows, “Engine 1 on scene as College Command on alpha side. One story strip center, heavy smoke and flames visible from two center occupancies. We’re defensive to cut off the fire on the Bravo side, preparing to make entry at the Dollar Store. (As units arrive at their Level I staging location)-- E10- lay in and take the Delta side, E7-water supply to E1, T1-Utility Control, (understood for M3-medical/rehab). Turn in a second.” 2. With just this initial report, the units working on scene have been organized within two geographic Divisions (Bravo & Delta) for fire control, and two functional Groups (water supply & utility control). 3. When the Chief Officer subsequently arrives, he/she then knows what has already been set in motion and where crews are supposed to be located on the fireground (accountability). His/her function now is to assume command, check the progress of the initial IAP, make adjustments as necessary, assign the incoming crews to support the working crews efforts, re-assign crews as they complete assignments or as the incident status changes, and continue to expand/contract the incident organization SOG 201.01 – Local ICS & NIMS Page 27 of 36 f. In the previous example, the incident is less than five minutes old, and already has four divisions/groups in place and a stationary IC operating strategically in the command post. Since the incident began in an organized fashion, the IC can focus on the big picture, react to reports, and concentrate on the effective allocation of resources. An organized beginning has a much higher probability of remaining under control for the duration of the incident than does an unstructured, disorganized freelancing event 6. Branches and Sections a. Effective incident operations have Command operating on the Strategic level. Supervisors operate on the Tactical level. During major operations, Branch Officers provide the coordination/connection between Command and the Groups/Divisions. Branches are activated when: 1. The incident is forecasted as a major event that will end up needing many groups/divisions to control. 2. The incident has two or more distinctive components (i.e. a large haz mat spill with a major evacuation). 3. The incident is spread over a large geographical area (i.e. large commercial structure fires, high rises, wildland, etc.) 4. Anytime the number of operating Divisions/Groups is forecasted to overwhelm the IC/Unified Command Team. b. The activation of branches signifies that the incident is going to be split into (typically large) separate pieces. Each branch should ideally operate on its own radio channel. When branches are assigned the Branch Officer should be briefed by Command on the following: 1. The overall incident action plan. 2. Their particular assignment & objectives (fire, medical, evacuation, etc.). 3. What Divisions/Groups and other resources are assigned to them. 4. What radio channel they will be operating on and their radio designation. 5. Any other pertinent information. c. Branch Officers should then insure the divisions/groups/crews assigned to them are notified that they are now reporting to the Branch Officer, along with the radio channel assigned to the branch. SOG 201.01 – Local ICS & NIMS Page 28 of 36 d. The next step in the escalation of command occurs with the activation of Sections. As the incident continues to escalate and before Command becomes overwhelmed, sections should be established to support the Command Team. When Sections are implemented, they report directly to Command. Traditionally, the ICS has established four sections, each managed by a Section Chief: 1) Operations, 2) Planning, 3) Logistics, 4) Finance/Administration. Depending on the type and size of the incident problem, a Safety Section and/or Information/Intelligence Section may also be established. In general, the responsibilities of each of the Sections are listed below: 7. Operations a. Coordinating mitigation activities with the IC. b. Implementing the IAP. c. Assigning units to divisions/groups/branches based on the tactical objectives and incident priorities. d. Building an effective organizational structure through the use of branches and divisions/groups. e. Providing and coordinating branch and division/group tactical objectives. f. Determining needs and requesting resources. g. Consulting with and informing other sections and Command as required. h. Supervising assigned personnel. 8. Planning a. Evaluating the current strategy and IAP with command b. Refining and recommending any changes to the IAP c. Evaluating the incident organization and span of control. d. Forecasting possible outcomes, hazard behaviors, contingency plans. e. Evaluating future resource requirements. f. Utilizing technical assistance as needed. g. Gathering, updating, improving, and managing information within a standard, systematic method. h. Establishing a demobilization plan. i. Supervising assigned personnel. 9. Logistics a. Managing the Rehab Group. b. Managing personnel accountability outside the hazard zone. c. Managing staging. d. Providing and managing any needed supplies or equipment. SOG 201.01 – Local ICS & NIMS Page 29 of 36 e. Forecasting and obtaining future resources needs (coordinated with Planning) f. Providing any needed communications equipment. g. Providing fuel and needed repairs for equipment. h. Obtaining specialized equipment or expertise per Command. i. Providing food and associated supplies. j. Securing any fixed or portable facilities. k. Coordinating immediate Critical Incident Stress Debriefing when necessary. l. Providing any other logistical needs requested by Command. m. Supervising assigned personnel. 10. Finance/Administration a. Procuring services/supplies from sources both inside and outside the department or City, as requested by Command (coordinated with the Logistics Section). b. Documenting all financial costs of the incident. c. Documenting for possible cost recovery for services/supplies used. d. Analyzing and managing the legal risk for incidents. e. Establishing a PIO and community relations contact with administrators, media, politicians, community groups, etc. f. Serving as Command’s liaison with City Officials (both political and administrative), litigators, and regulatory agencies. g. Monitoring and coordinating emergency service delivery to the rest of the community during major incidents to ensure adequate coverage. h. Serving as the EOC representative in the Command Post (and provides briefings to EOC staff). i. Managing investigations. j. Managing post incident review preparations. 11. Safety a. Supervising Safety Officers. b. Evaluating all aspects of the overall operation that affects safety. c. Monitoring the safety of workers operating within the hazard zone. d. Evaluating changing incident conditions (getting better or worse). e. Evaluating changing structural conditions (getting better or worse). f. Stopping unsafe acts. g. Setting up and managing RIC teams. h. Managing accountability within the hazard zone. i. Evaluating the operation as it relates to the Risk Management Plan. j. Evaluating whether the strategy matches the conditions. k. Assisting supervisors with managing points of entry (access control to hazard zone). SOG 201.01 – Local ICS & NIMS Page 30 of 36 l. Coordinating and providing technical assistance for the IC and other Sections. 12. Information/Intelligence a. Developing, conducting and managing information-related security plans and operations including information and operational security activities as well as ensuring sensitive information is handled in such a way to safeguard the information and ensure it gets to those who need access to it. b. Coordinating the information- and operational-security matters with public awareness activities that fall under the responsibility of the Public Information Officer. 13. Unified Command a. Whenever an incident is co-managed by two or more separate organizations, it is operating within a unified command structure. Examples we see every day include: 1. Medical emergencies that involve a first responder apparatus and a med unit. 2. Residential structure fires that involve fire, EMS and police units, along with utility companies and social service agencies (Red Cross). 3. Mutual aid calls through the Sabine-Neches Chiefs that involve both City and other external resources. b. Unified command situations have historically raised the question of which agency is/should be “In Command” at different incident types or at a given point in time. In many localities, this has resulted in turf battles and power struggles between agencies over control of their resources. These battles are not in the best interest of the customers we serve. To this end, the department/agency that is most capable of dealing with the critical incident factors at a given point in time will be “in command,” and acknowledged as having Lead Agency Status. As the incident evolves, and the critical needs of the incident change, command can be transferred to the most appropriate agency’s representative. c. For example, City-wide incidents whose current predominate need is for fire, technical rescue, or hazardous materials mitigation would logically acknowledge the fire department as having Lead Agency Status. Incidents that have a current predominate need for security (i.e. bomb threats, riots) would assign the police department Lead Agency Status. A common example of a situation where command can be transferred as the event evolves might be a car wreck on the interstate requiring extrication of occupants with a leaking fuel tank in one of the vehicles. Initially, while SOG 201.01 – Local ICS & NIMS Page 31 of 36 immediate life safety needs are present (extrication, stabilization, and transport of patients), and until any threat from spilled hazardous materials has been removed– the fire department would be in Command. When these needs are mitigated and the predominate need shifts to traffic management– the police department would assume command. d. Longer term incidents, like hurricane evacuations, response and recovery (NIMS Type 5E and greater events), require intensely coordinated unified command efforts and the activation of the City’s Emergency Operations Center (EOC). When the incident organization escalates to this point, the individual(s) operating at the various emergency calls for service occurring in the field are called Incident Commanders. The person managing the event at the City EOC is called the Incident Manager. In any case, if the incident is spread out over a large geographic area, the affected areas should be broken up into manageable units (branches, groups, divisions, etc.). XIII. Review, Evaluation, and Revision of the IAP A. The primary reason for the Incident Commander to perform “never-ending size- up”– the review, evaluation and revision process– is so that workers can operate as safely as possible, complete the tactical priorities, and go home in one piece when their shift is over. The capability to evaluate what’s going on and then to appropriately respond to it is the ultimate reason for implementing the functions of command. It is how Command matches actions to conditions. B. While review, evaluation and revision is the seventh function of command, it is something that an effective IC does throughout an incident, beginning in the front end of incident operations. With the effective completion of the Initial Reporting Process, a fast-action Company Officer IC establishes the first five functions of command from an exterior position many times within one minute of arriving on scene. This serves to begin incident operations under control within a structured plan. C. Having the IC perform the standard command functions from the beginning of incident operations provides the launching pad for the revision process, which is required to keep the strategy and IAP in-line with current incident conditions. The investments the IC makes early in the incident can provide major benefits when changes need to be made later on. Conversely, when the standard command routine is not followed, the negative effect is generally felt later on, when the IC needs to make revisions and simply does not have the command and control capability established to enable him/her to do so. SOG 201.01 – Local ICS & NIMS Page 32 of 36 D. The IC must establish effective command and control to support responder safety. Answering “yes” to the following questions evaluates the extent to which the IC is actually in control of an incident (is in “Command”): 1. Can the IC control him/herself? 2. Can the IC maintain an effective command position? 3. Does he/she know what’s going on in all critical areas? 4. Does the IC have an IAP? 5. Can the IC control the strategy? 6. Will the troops listen and talk to the IC? 7. Will the troops follow the IC’s instructions? 8. Can the IC evaluate the effectiveness of the operation and make decisions? 9. Can the IC change the assignment, location, and status of his/her resources? 10. Can the IC call for help and get it? 11. Can the IC enforce his/her plan before, during, and after the event? 12. Is the IC responsible for the overall outcome? E. The ongoing incident evaluation must address responder safety and the tactical priorities. The IC must first evaluate if the current Mode (Offensive/Defensive) is correct. He/she must apply the standard Risk Management Plan as the tactical priorities are completed and benchmarks are reported. Offensive operations are focused on first providing for life safety, by extending and completing a primary search, and getting an “All Clear” in the occupancy. Defensive operations are centered on stopping the spread of fire to exposures. To minimize risk to responders, the IC must ensure that the current strategy matches the incident conditions AND that the tactics being employed match the current strategy. F. Within the Risk Management Plan, the tactical priorities are the hierarchy the IC uses for evaluation, decision-making, and creating effective action in the four standard operational areas (rescue/hazard control/property conservation/customer stabilization). Being able to take control of the Critical Incident Factors (through achievement of the tactical priorities) is the reason we are called to mitigate the emergency. Standard actions matched with standard conditions produce standard outcomes. When the standard actions do not have the anticipated effect, the IC must adapt the plan. General evaluation questions to consider: 1. Does the IC have effective command/control of the operation? 2. Has he/she correctly evaluated the critical incident factors? 3. Are actions (tactics) matching conditions? 4. Is the attack response large enough to control the hazard? 5. Is the attack receiving adequate support? 6. Are adequate resources in place to reinforce the current operation? 7. Has the IC balanced resources in relation to the tactical problems? SOG 201.01 – Local ICS & NIMS Page 33 of 36 G. When the current plan does not meet the needs of the situation, a tactical and/or strategic transition is required. Smooth, safe, controlled transitions required active, coordinated management. Regular progress reports are an important part of keeping the IAP current. Without adequate communications from the troops, the IC can not appropriately adjust the plan. A good IAP allows room for minor adjustments and can be expanded as conditions change. XIV. Continuing, Transferring, and Terminating Command A. A fast-action, mobile IC can direct his/her crew and can make initial assignments to several other units using their portable radio. If this first set of actions solves the problem (completes the tactical priorities), the evolution of Command ends there. In terms of command and control, the standard objective is to provide enough command to manage the units that will be required, for the length of time it will take to complete tactical priorities for the incident. During this period, the ability of the IC to effectively conduct command operations determines the overall management effectiveness of the operation. B. The fast-action initial IC can put the necessary (and critical) front end in place of the Command operation, but that is his/her limit. For Command to be taken to the next level, it must be transferred to an IC who will operate in a stationary, strategic position. For us, when fast-action is needed, passing command to the next unit on scene may be required. Any emergency response that exceeds the ability of a fast-action IC to manage requires command help via a stationary Incident Commander. C. Transferring Command - The actual command transfer is regulated by the following procedure: 1. The current IC (IC#1) assumes a standard command position:  Investigate  Nothing Showing  Fast Action  Offensive Attack  Marginal  High Risk Offensive Rescue Attempt  Stationary  In Command Post 2. The arriving ranking Officer contacts the current IC directly. Face-to-face is preferable, but not always possible. 3. The IC being relieved will provide a progress report to the on-coming IC that includes:  Situation status  What do you have?  Assignments  What’s been done?  Tactical Needs  What do you need? 4. The new IC (IC#2) officially assumes command over the tactical radio channel, indicating his/her position. SOG 201.01 – Local ICS & NIMS Page 34 of 36 Example - Residential Structure Fire:  Engine 10 is the first unit on scene and becomes IC#1 with the following, “E10 on scene as Corley Command on the alpha side. Two story residence, fire coming from two rooms on the second floor, bravo side. We’re fast action for search, employing fire control. Pass command to next in unit.”  Engine 10's completion of the Initial Reporting Process serves as the progress report for next IC and/or the incoming Chief Officer.  Upon arrival, Car 53 assumes Command with the following, “Car 53 on scene, assuming Corley Command on the alpha side.” 5. The arrival on scene of a ranking officer DOES NOT, in and of itself, mean that command has been transferred to that ranking officer. Command is transferred only when the standard procedure is completed over the tactical radio channel. No matter how many Chief Officers respond to a given emergency, there is only ONE Incident Commander– and that is the last person who assumed command through the established assumption/transfer of command procedures. 6. If a ranking officer arrives on scene and does not complete the command transfer procedure as required, he/she IS NOT in command of the operation. Ranking Officers arriving after a stationary command post has been established will either assume command according to the standard procedure, or report to the command post for assignment by the current IC. A good, basic command transfer rule is– If you can’t improve the quality of command, don’t transfer it. D. Command Teams at Local-Level Incidents 1. Building a command team during major local incidents can be equivalent to establishing Sections under the National Incident Management System: EOC Officer Position Field Officer Position Operations Section Chief = Incident Commander Planning Section Chief = Support Officer Incident Manager = Senior Advisor 2. As the ranking officer on scene, the Senior Advisor is ultimately responsible for the incident outcome in the field. The Command Team is located in the command post, working together to react to (Operations) and anticipate (Planning) the critical incident factors, providing the same functional benefits as Section Chiefs serving in an EOC. SOG 201.01 – Local ICS & NIMS Page 35 of 36 E. Terminating Command 1. When the IC comes to the end of achieving the tactical priorities, he/she must demobilize the operating companies and terminate command. Fatigue should be considered in the demobilization decision. In general, the crews that arrived first should be demobilized first. Command can be de-escalated as the incident winds down by reversing the command transfer process to a lower-ranking, or otherwise qualified officer. XV. National Incident Command System Documentation Requirements A. When incidents escalate to the level of Emergency Operations Center (EOC) activation, formal Incident Action Plans (IAPs) and other written documentation is required. When this occurs, for each operational period for the duration of the incident persons individually assigned to Command, General Staff, operational, or support roles will complete the ICS 214-B: Individual Log. Additionally, the work group’s supervisor will complete the ICS 211: Check-in for each operational period. B. Every individual is responsible for accurately documenting their activities (and/or the activities of their work group). They are also responsible for ensuring that forms are routed correctly and that they are received on-time. Since the logistical requirements for different types of incidents may be different, it is Command’s responsibility to communicate to responders where, when, and how these forms will be collected. C. The Command and General staff team will ensure that Incident Action Plans are compiled and distributed for each operational period. Specific forms and supplementary documentation included in the IAP may vary, depending on the nature of the event. However, as a minimum, the IAP should include the following forms: 1. ICS 202: Incident Objectives 2. ICS 203/207: Incident Organization List/Chart 3. ICS 204: Assignment List 4. ICS 205: Radio Communications Plan 5. ICS 206: Medical Plan D. When Sections are implemented, Section Chiefs will ensure that the appropriate ICS forms are being completed and distributed to support the efficient and effective management of the incident. SOG 201.01 – Local ICS & NIMS Page 36 of 36